KD Scientific Syringe Pumps

KD Scientific Syringe Pumps with infuse and withdraw capabilities provide maximum flexibility for varied applications. This feature permits applications such as automatic withdrawal of samples and unattended filling of syringes; fluid level adjustments with continual infusing and withdrawing; and the infusing of drug or nutritional materials, and diffusion into chemical reactors. Choose from the economical 100 series syringe pumps, or the more powerful 200 series.

A basic single syringe, infusion pump which combines precision with simplicity.

KD Scientific Infusion Only Syringe Pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications. This includes infusing calibrant into a mass spectrometer or reaction chamber, long term drug infusions to animals and general infusion applications.

KDS syringe pumps are known for their outstanding reliability and performance. The KDS 100 series syringe pumps provide the most cost-effective solution for infusing fluids.

Series 100 Pumps

The Series 100 Syringe Pumps are an economical line of pumps for loads up to 20 lbs. There are no ports for external control. That is, they can only be operated from the keyboard. The step rate from one step/30 sec. up to 400 half steps per sec., allows a wide range of smooth travel speeds.

Features

Single syringe 10 µl to 60 ml, any manufacturer

Simple menu-driven setup:

select syringe size from displayed table

set dispense volume

set dispense flow rate

Easy to read bright, backlight display

Dispense volume displayed and has automatic shutoff at completion

Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size

Last settings stored in permanent memory

Button release of drive nut for easy syringe installation

Choice of run / stop after a power interruption

This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application. Ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications. This includes infusing calibrant into a mass spectrometer or reaction chamber, long term drug infusions to animals and general infusion applications.

This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application.

KDS syringe pumps are known for their outstanding reliability and performance. The KDS 200 series has the advance features with RS232 and TTL interfaces. All the 200 series pumps can be daisy-chained together to create a syringe pump network.

Series 200 Pumps

All pumps in this series have more powerful motors (a total of 40 lbs.of force before stall) and smaller micro steps (0.165µl). That, together with a higher pulse rate maximum (1600/sec) enables a wider range of smoother travel rates.

Features

Holds one or two syringes, 10 µl to 140 ml each

Backlit LCD displayKnob locks/unlocks drive block for effortless, drag-free manual adjustment

Simple menu-driven setup: select syringe size from displayed table, dispense volume and dispense flow rate

Continuous dispense volume display

Preset volume control and automatic shut-off

Choice of unit selection

Settings can be reviewed or changed during operation

Stall detection

Last settings stored in permanent memory

Built-in RS232C interface for computer “daisy chaining” up to 100 pumps

TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control

Optional multi-step keypad programmable feature available

Series Programmable Pumps — each step may include:

Time duration from 1 sec. up to 12 hrs.

Travel direction, infuse or withdraw

Flow rate at the beginning of the step

Flow rate at the end of the step (continuous smooth ramp between)

Pause, wait for external trigger or gate

Set status of TTL output pins

Loop back to previous step

Number of times to repeat loop

The 53210 Pump is a high pressure syringe pump with >100 lbs. linear force. This extra force makes the pump ideal for delivery of fluid to reactors in chemical applications, or for working with viscous fluids. The robust design of the syringe holder ensures the syringe is kept level during delivery of the fluid. It features two different types of clamping mechanisms, for both smaller and larger syringes.

Advanced features include independent rate and volume settings for both infusion and withdrawal. KD Scientific Syringe Pumps with infuse and withdraw capabilities provide maximum flexibility for varied applications. This feature permits applications such as automatic withdrawal of samples and unattended filling of syringes; fluid level adjustments with continual infusing and withdrawing; and the infusing of drug or nutritional materials, and diffusion into chemical reactors.

Features

Holds two syringes, 10 µl to 140 ml each

Backlit LCD display

Knob locks/unlocks drive block for effortless, drag-free adjustment

Simple menu-driven setup: select syringe size from displayed table, dispense volume and dispense flow rate

Continuous dispense volume displa

Preset volume control and automatic shut-off

Settings can be reviewed or changed during operation

Stall detection

Choice of unit selection

Last settings stored in permanent memory

Built-in RS232C interface for computer “daisy chaining” up to 100 pumps

TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control

Independent rate and volume settings for infusion and withdrawal

Multiple mode selection:

Infusion

Withdrawal

Infusion then withdrawal

Withdrawal then infusion

Continuous cycle

Optional multi-step keypad programmable feature available

KD Scientific Syringe Pumps

KD Scientific Syringe Pumps

Product Code: 206

Contact Us